Category: Porch

Outdoor glider with canopy is an excellent option to add on your outdoor space at the house. It protects you from heat and direct sunlight.

However, choosing a glider with canopy is a little trickier than finding the usual one.

Check out the following details for factors to consider and tips to add a frame on this furniture.

See also: Porch Glider Swings Ideas.

Things to Consider before Buying

1. Comfort

The purpose of having porch glider or outdoor glider is not only for decoration but also for relaxing. Therefore, comfort must be considered before buying the porch gliders with canopy.

Choose the porch glider which combines comfortable material such as hardwood, aluminum, or cotton for the puffs.

2. Material

The material of porch glider is related to your own style and home decoration. If you like the traditional decoration, you may choose the wooden-base porch glider such as cypress, cedar, ash and oak.

If you prefer to the modern one, you may choose the porch with the waterproof sealant so that it will resist from water damage.

3. Durability

It is also important for paying attention the durability of the glider because the outdoor glider will be in intense contact with the weather-changing. Make sure that the material is high quality and easy to clean.

4. Cost

If you want to buy the outdoor glider with the best material and good quality, the cost will be high. But it is worth the price. Therefore, it is better to save the money rather than change it every year.

5. Style

Porch glider with canopy is a perfect choice for modern look in the outdoor part of your house. By choosing the porch glider with canopy, it will be protected from the sun light.

It is also completed with cup holders which make you be more comfortable with it. The canopy can be fit everywhere and anywhere.

See also: Outdoor Glider Cushions Ideas

How to Build the Frame for the Porch Glider with Canopy

The canopy on the porch glider will cover the glider itself from rain and sun. It will be complete the frame. So, how do we build or make the frame for the porch glider with canopy?

First of all, you need 4-inch stove bolts, 2 1/4 –inch round pine dowels and tape for measurement. After preparing the material, let’s take a look to these steps.

1. First, measure the porch glider’s length across the back. After that, measure the canopy cross rails length. Using the measurement, obtaining around 25 dowels both for the long and short dowels.
2. Second, put the stove bolts to the ends of the dowels then connect it together as the frame which looks quite similar with the table frame.
3. Last, put the cross rail dowels to the frame so that the frame is supported with it. When the frame is already constructed, you may slide the canopy of the porch gliders and wrench it over the glider.

Having porch glider with canopy is good for preventing yourself from sun light and rain. However, there are several things that you should pay attention to before buying it and you may build your own frame for porch gliders with canopy.

Originally posted 2019-12-30 00:49:35.

You must find a hard time when you want to afford a glider loveseat in the market because the variety of the glider loveseat is huge.

Then, before you head to the market or store you have to come up with some considerations. What considerations should you take?

Therefore, for further information, check out the following buying tips on glider loveseat.

Read also: Porch glider swings.

Define Your Needs

First thing first, you should define why you need to buy a glider loveseat. This is very essential as people often regret their decision when they buy one but it doesn’t match with the house environment. Therefore, it is important to answer these questions to make your choice falls to the right one.

1. What will this glider be used for?

The first question is aimed to decide why you need this glider. If you afford this glider only to decor your outdoor environment rather than to be used to other need like relaxing or family gathering, then you have to re-consider buying the glider.

2. How much space will it take up?

Space is what matter most for you to pay attention to. It is because if you accidentally buy a big glider loveseat while your outdoor porch is narrow, then the glider will eat up the porch’s space. In result, your porch will not be decorative as it looks. Make sure to do a measurement to your outdoor porch.

About Resistance and Comfort of a Glider Loveseat

The next thing you should consider is about the resistance and comfort of the glider. There are things you should check in as follows.

1. Structure

If you need an outdoor glider, then what you need to do is to choose the right structure. A quality wood material will be the perfect choice for a glider loveseat, such as cedar or mahogany.

Those wood materials are really durable and can withstand to any severe weather. However, you can choose metal or plastic structures as well if you find that the price for wooden glider is too expensive.

2. The Padding

Some people prefer a softer seat, but others prefer a firm one. Then, it is up to you to decide whether you want a glider that has cushions or one without cushions.

See also: Outdoor Glider Cushions

Elements to Check in a Glider Loveseat

Other elements in a glider loveseat should be paid attention as well.

1. Easy Maintenance

Choose a glider loveseat that is easy to maintain. Easy to maintain means that the glider is easy to wash, clean, or repair when it is damaged.

However, the ease of maintenance depends on the type of upholstery you choose. Normally, vinyl or plastic material offers easy maintenance than wood material.

2. Comfort

This is the last thing you should check to complete your consideration, which is about comfortable. To make sure of its comfort, what you need to do is to simply try sitting on it. Once you find out a glider that provides comfort as well as all the mentioned aspects, then you are ready to buy it.

In conclusion, buying a glider loveseat requires some considerations if you really need the right choice for your outdoor porch. By buying the right one, the glider loveseat will provide more comfort to both environment and its own feature. These buying tips will definitely help you out deciding the right choice for your glider loveseat.

Originally posted 2019-12-28 11:49:55.

For those who love to relaxing should love to spend their time sitting on their porch glider.

The glider will be more comfortable if it has glider cushions add-on. Cushions will provide comfort and style as well to your glider.

While they are can be quite expensive to buy, you can actually make them by yourself.

Read also: Maintaining Porch Glider Swings.

1. Measure the Area of Your Glider

First of all, you need to measure the area of your glider, so that you can know the exact size of fabric and how much foam to purchase.

Moreover, you should do this by measuring separate seat area as well as the back of the glider if you need to make cushions up to the back of the chair. Measure the width by length to get exact measurements.

2. Select the Fabric You Want to Use

After that, head to fabric supplier to purchase the fabric that you want to use. Select the fabric according to your preference and don’t forget about the thickness of the foam.

The thicker the foam, the more comfortable the cushions will be. Thick cushions take longer to dry than thinner ones as well. So, decide wisely!

3. Measure and Cut the Fabric

After you get all the materials you need, you need to measure and cut the fabric. To do this, lay down the fabric over the foam and add a half inch to one inch clearance for the seams on each side of the fabric.

You have to make sure to keep in mind about the thickness of the sides of the foam as well.

4. Sewing Time!

Then, it comes to sewing time. The two sides for the back and front of the cushion need to be sewn together.

Make sure to sew them inside out on three sides and leave a seam allowance of a half inch to one inch, just like you sew a pillow. To complete the cushions, you also need to sew the zipper.

The zipper gives benefit from double stitching the seams and to add durability because the cushions often take a lot of tear and wear.

5. Stuff the Foam into the Cover

Finally, it comes to the final step which is stuffing the foam into the cover. To do this, you need to turn the fabric right-side out, then fill it with the foam.

You may need to use a long object as well in order to make sure the corners of the covers are pushed, so that the foam can fill each side of the covers.

Moreover, you may need to make clean edges on the corners by cutting off some of the seam allowance. Then, zip up the open side.

Making your own glider cushions can actually be the most fun and rewarding experience. Besides, you can choose your own materials according to your likeness, such as the fabric style, the thickness or thinness of the foam, and etc. Moreover, by following this tutorial you don’t have to look somewhere else to make your own porch glider cushions.

Originally posted 2019-12-27 01:43:10.

Porch glider is one of the outdoor furniture that can be used to relaxing. You can either build it by yourself or afford porch glider in the furniture shop.

However, if you ever happen to do some maintenance to your old porch glider, then you have to look for the instructions to do proper maintenance.

Therefore, here is an easy way to do that. Just keep reading!

Read also: The Types of Porch Swings.

Restoring Old Porch Glider

If you have an old porch glider and it needs to be inspected and re-finished, here are things you should do.

1. Identify the Kind of Glider

The first step you should do is to identify the kind of glider you have. Most of porch gliders are made of some weather-resistant wood, such as mahogany or cedar.

However, some older wooden gliders were made of quality balsa wood. The reason why you have to identify the kind of glider you have is to make sure you do proper maintenance to it.

2. Re-finish the Old Glider

If you have identified the glider, such as it is made of quality balsa wood, then your glider is still durable enough to be refinished.

Refinishing the glider can be done by stripping or sanding to remove old stain and paint. After that, you just need to refinish the weather-resistant stain, colored varnish, or paint of your preference.

3. Advanced Repair to Be Used Safely

If your glider needs to be repaired because there are several damages on it, then you can easily rebuild the main elements to repair the glider.

Cut new slats for arms and back, the seat, replace damaged or cracked legs, and make sure to strengthen the gliding joints. However, you may want to consider to match the wood type as well.

Additional Tips: Replacing Porch Glider Hardware

There are some additional tips regarding to replacing porch glider hardware. Here are things you should know.

1. Removing the Old Hardware

First, turn the glider upside down. Then, in order to remove the old hardware, you need to use a ratchet to remove all of the nuts that connect the chair to the base. Remove the long bolts followed by the arms. Finally, lift the glider’s base from the chair.

2. Replace the Hardware

Make sure that the screws and bolts fit correctly to the gliding mechanism. Attach the hardware and the new arms in the same way to the original place. You will need a second person to help you when installing the new hardware.

3. Finish the New Glider

With your screwdriver, screw the bearings into place. Make sure to check the tightness of the screws. Also, tighten the nuts and finally you can turn the chair back over.

Maintaining your porch glider is quite easy task to do. You don’t have to own specific skill to do that because most of porch gliders were made of quality wood materials.

Moreover, these instructions on how to maintain your porch gliders will make your day easier and you can relax on your beloved glider in no time.

Originally posted 2019-12-26 07:20:43.

To make their house looks more essential, most of house owners like to have their own décor of ceiling panels, especially in the porch.

From all of panel types, beadboard is one material that most of house owners use to complete their ceiling panels.

Installing beadboard panels is not difficult once you know the steps.

Read also: How to Install Your Own Porch Ceiling Lights .

1. Measure the Porch Ceiling

Just like all project, the first thing that you need to do is measuring. This time you need to measure your porch ceiling.

You can start by measuring the area that you will decorate. Use some common measurement stuff like tape measure, pen or pencil and something you can write on.

A step ladder is also necessary, since it won’t be possible for you to directly reach your porch ceiling. Place the ceiling joists above your porch then measure the distance between the joists.

For example, if the joists were going east to west, you would go north to south. Note all the measurements carefully and make sure that you remember where each particular measurement came from.

2. Cut the Beadboard

If you are finish with the porch ceiling, it’s time to deal with the beadboard. Measure the lengths from the porch ceiling to the beadboard planks using your tape measure.

Use pen or pencil to mark them then cut them down to size using a miter saw.

For this particular cutting, you need to prepare a miter saw blade at a 90 degree angle. It will really help you to produce straight and long cuts.

Repeat this step until you have enough cuts to cover the porch ceiling. Make sure that you produce the same size for all cuts.

3. Install the Beadboard

After making sure that you already produce the cuts for the same size, it’s time to install the beadboard.

Take the first piece of beadboard then push it up to the ceiling. Start with one side first so it’s going to across the joists that you already measured.

Place the grooved side and make it face the wall, so there will be a small gap along the line. By driving the flooring nails into the board, nail the board in place where the ceiling joists and the beadboard line up.

4. Cut Off the Ceiling Trim

Then the last step you need to do after installing the beadboard is cutting off the ceiling trim. Take the ceiling trim that is a thin edge of the board to hide the joint around at the edge of the ceiling.

Take the first piece and make it 245 degree angle at the end of the piece. Install it into the end of the beadboard then slide the second piece of the trim against it. Mark the angle that will need to be cut then trim it down until it fits together with the first piece.

Those steps are recommended to be applied if you plan to decorate your porch ceiling beadboard panels. Understand every step first before you start doing the instructions. Correct measurement is really needed in this kind of work.

Originally posted 2019-12-23 01:30:16.

Although it is not really blowing wind, most of house owners like to attach any ceiling fans to their outdoor porch.

It’s simply because fans are not only installed to give any additional wind but also to add more esthetic touch.

Here are some steps that you may follow to install your own ceiling fans.

Read also: How to install your Porch Ceiling Lights.

1. Select the Right Fan

The first and the important thing of all steps is of course deciding the fan that you are going to install. If you still find any difficulties in deciding the right fan.

Consider the place where you are going to hang it. If you are about to install a fan on a low ceiling, a flush mount model is the right choice. If you are going to install a ceiling fan in a space with very high ceiling, go for a model with a pole extender.

Choose the fan blade length based on the size of the space you want to be cooled. Larger room will definitely need longer blade size.

Measure the blade length size from the tip of one blade to the tip of other blade. If you plan to buy an outdoor ceiling fan with light on it, give more attention to the light. It has to be made for outdoor use.

2. Install A Support Brace

Try to choose a fan that use weather-resistant materials and specifically designed to keep moisture out of electrical parts and critical motor. Attach a support brace to the electrical junction box once the electricity is turned off and the existing light stuff is already removed.

Replace the brace with sturdier supply for your fan which ensures that it provides proper support. Take the best time to install the blades before you connect the fan onto the bracket.

Make sure to tighten up all the screws when you attach the fan blades to the motor. You may be prompted to do this step earlier, depends on the brand of your ceiling fan. Consider about the time saving and the aggravation when considering to install the fan blades.

3. Reconnect the Wires

Use any weight strips to balance the fan blades. It will also help you in reducing wobbling and improving efficiency.  Connect the ceiling fan to your switch-housing.

If you have any light kit, install and assemble it onto the switch-housing, just like a glass light cover and its appropriate light bulb. Before turning the electricity back and testing all connections, make sure that the fan is completely assembled.

Also make sure that it will be functioning properly and work as you expect. Some of ceiling fans units come with remotes that allow you to freely adjust the blades speed when you are not possible to reach the fan.

Attaching any ceiling fans to our porch is a not a difficult work to do once we understand the step and how it works. Make sure you understand every step to avoid any unwanted things caused by the wrong installation of your ceiling fan.

Front Porch Ceiling Fans Gallery:

Originally posted 2019-12-22 00:01:12.

Making porch gate for dogs can help you to restrain your dogs’ movement. So whenever the front door is opened then the dog won’t go out that easily.

To build this gate may seem difficult at first but if you follow these steps below then you can build it in no time.

Read also: How to Maintain Front Porch Gate.

1. What You Need

The first thing you need to have is the tool and the ingredients needed to make this gate. Unlike porch gate for human, you can make this one a little bit shorter than the regular one.

The tools that you need are hammer, drill, saw, hinges, nails, clamps and a rail. The door can be 2 sided but it can also be just 1, depends on your need.

If you want 2 sided gates then you must have 4 hinges. If you only want a gate then you just need 2 hinges.

Make sure that all of your tools work just fine. Also, you might want to add tools like liquid nail so you don’t have to use nails at some parts.

As for the ingredients, you can use pallet wood if you have some. Using pallet wood is much easier than using a regular wood sheet. A regular wood sheet needs to be cut into some pieces but using pallet wood will surely save your time and money.

If you have the thought to use wood stain so you can refinish it later then so be it. But, doing a paintjob means that you need to have additional tool which is sand paper.

So what’s the use of sand paper and all of the things above anyway? Well, check out the information below.

2. How to Build

First of all, whatever kind of wood you are using; cut them into L shape with height taller than the dogs and width as wide as where you put it.

After that, combine these L words to make a frame of the gate by hammering the nails into each edge. When you are done with the frame, check whether it is strong or not.

If it does, start installing the hinges on the end of the frame (2 hinges are enough). Also, install the hinges on the platform you planned. Make sure the hinges are strong enough so it won’t break so easily.

If you are using pallet wood, then you don’t need to do anything else. Simply take off the pallet wood from its frame and put them on the gate frame.

Make sure each gap has the same width or your dog cannot see outside. To glue the pallets and the frame you need liquid nail and clamps.

So why clamps? Because it helps the pallet and frame gets together. If you are not sure with the gaps, use a rail to determine the gaps. This way you can make perfect gaps for your gate.

Dog gate is pretty easy to be made and you can always use pallet wood to keep it cheap. As for refinishing it, you can use wood stain to make the color darker. But before refinishing, make sure there is no dirt and debris that can make the paintjob turn bad.

Originally posted 2019-12-19 01:17:25.