Tag: Guide

When you find something wrong with some specific parts of your house, it’s sure that you always find all the way to fix it by yourself first, so does with bathroom faucets handles.

Although it looks complicated, replacing your bathroom faucets handles is possible to be done.

Read the following steps below to help you do it by yourself.

Read also: How to Remove Mold from Bathroom Walls?

1. Identify the Type of Your Faucet

The most important thing to do first is identifying the type of faucet that you have. Since there are so many types of bathroom faucet, identifying the type of yours will ease you in finding the new faucet handles.

Once you identify it, go to some local store near your house or try to search it online. If you still can’t find the one you are looking for, it’s okay to take a picture of the handles and bring it when you go to some store.

2. Check Your Equipment

This kind of job surely requires some specific equipment in the process. After you got the one you are looking for, check first what you have in your storage.

This job will need some tools like adjustable wrench, pliers and other things. You can know what kind of tools that you’re going to need if you already notice what’s wrong with the faucet. So the main point is knowing the problem first.

Read also: Ways to Keep Bathroom Faucets Brushed Nickel Shiny.

3. Start the Process

If you’re finish with those two first steps, it’s time for you to start the project. There are some steps too that you need to do sequentially to ease you do the replacement.

Make sure that you do these steps with the correct order to prevent you from doing the instructions twice or even adding any addition damage. So here there are.

• The very first thing that you must do is surely turning off the water supply. Turn off the both supplies if it’s a single-handle faucet.
• Make sure that no water is coming out when you the handles that you are going to replaced are turned.
• Most of faucet handles have a cap or false top. It can be a metal cap or the same material like the rest of the handle. Examine it first before continue to the next step.
• Using the head of flat screwdriver, lose the cap and pry it up. Then use any appropriate screwdriver to remove and loose the screw of the faucet.
• Once the old faucet is removed, place the new one and make sure that it will settle properly.
• Use the screwdriver to install it and do the same process just like when you remove it before.
• After the new faucet handles are installed, check whether the water comes out or not and make sure it works.

Read also: Bathroom Cabinet Paint Ideas.

Fixing all of your house problems by yourself will surely save your money rather than paying some professionals. As long as you do steps and instructions correctly, it’s assured that there will be no additional problem.

Originally posted 2020-02-06 10:44:57.

There are many materials that can be used to made bathroom faucets. Different materials definitely require different treatment, so do with oil-rubbed bronze.

Having a bathroom faucet that is made of oil-rubbed bronze definitely will make you to maintain it in different ways than you maintain any other materials.

Thus, here are some tips that you probably can apply when you’re maintaining oil-rubbed bronze bathroom faucets.

1. Clean the Faucets More Often

The most common tip is to clean your oil-rubbed bronze faucet more often than you clean any other parts of your bathroom. Keep the faucets from deterioration, corrosion and also from green film by doing the routine cleaning to your oil-rubbed bronze faucets.

Those are the three dangerous things that may harm your faucets. Do the right and proper cleaning to keep the great colors of your oil-rubbed bronze faucets shining.

2. Remove the Dust

Any dust appeared on your faucets will make it look dirty and doesn’t look shining. Keeping your oil-rubbed bronze faucets from dust will make you use different ways than you usually do to other materials.

Always remember to avoid hairspray, toothpaste or shaving gel and any other bathroom grime because those things can really harm the surface of your faucets. Instead, use soft and dry flannel then wipe it gently to the faucets.

3. Keep it from Grim

An abandoned oil-rubbed bronze faucet definitely requires proper cleaning since there will be so many grim appear on it. In case you find so much grim appeared, it’s better for you to use an approved gentle cleaning ways using soft-bristle.

This is the formula you need to prepare. Add one tablespoon of salt into three bowls of warm water and wipe your bathroom faucets using this formula then rinse it with clear water.

Remove all the grim and dust from all the crevices and all around the base. Wipe the bathroom faucets gently using a flannel cloth to finish it.

4. Polish the Faucets Periodically

This tip is the next level of maintenance and can be more complicated than the previous tips. Use a clean soft cloth and dip it to liquid wax then wipe it to the entire bathroom faucets.

Wait until dry enough to make it coats the whole faucets. Then use a new soft cloth to burnish the metal. It will make the faucets to restore the shine on the oil-rubbed bronze that probably has faded after some abandoned time.

5. Prevent from Disease

The last step is may be the most important one since it will help you to prevent the oil-rubbed bronze faucets from any diseases that may harm.

Since the combination of moisture and oxygen from the cleaning process produce chlorides, it’s a reminder for you since there will be a rough corrosion that may harms too.

Use sodium sesquicarbonate to reduce the possibility since it’s also used by professional plumbers in removing any diseases on oil-rubbed bronze.

Read also: Bathroom Faucets with Crystal Handles.

Different kind of maintenance is surely needed in taking care of our oil-rubbed bronze faucets since this kind of material is rarely used. Hence, those tips will make you easier in maintaining your oil-rubbed bronze faucets.

Originally posted 2020-02-05 15:43:44.

Do you want to replace your troublesome bathroom faucets knobs? The problems can be that the water keeps running even if the knobs are tight, there is water leaking in the knobs, or you just want another look of it.

To find out how to replace the knobs, pay attention to the information written below:

1. Check Water Supply

Every faucets has their own water supply and that’s why the first thing you need to check is the water supply where the water comes from; this is an essential need to do because if the water is still running while you are doing maintenance on the faucet then your sink will turn into a fountain.

To check the water supply, look down below the sink and find a valve on the same side as the knobs you want to replace. When you find it, make sure you twist the valve tightly to the right.

It will stop the water from getting up to the faucet. Also, you may want to test it by twisting the faucet knob to see whether the water comes out or not.

2. Take Off the Knobs

Then, you need to take off the faucet knobs and the process is really simple. What you need to do first is to check whether your faucet knobs have caps on top of them or not.

If they do, take off the cap from the knobs carefully by using a screwdriver with minus edge; don’t break the caps because you still need them. If the caps have been taken off, you will see screw on the knobs then unscrew it.

Now, you can take off the knobs and you will see the stem of your faucet knobs. If you only want to replace your old knobs with the new ones for the looks, then simply slide your new knobs on the stems.

But if there is a problem with your faucet knobs and you want to replace it so your problem can be solved, you need to take off the escutcheon as well. To take off the escutcheon, find two holes on it. Unscrew the screws in each hole with Allen key.

After it is taken off already, you can replace it with your new escutcheon. Simply screw the screws back into the escutcheon holes and attach the stem.

Then, slide your knobs back into place and attach the top caps as well; don’t forget to twist the water supply valve.

Do a check by twisting the faucet knobs; if the water comes out like usual then it works, but if it doesn’t then there must something wrong with your installment. If you don’t find anything, call a professional help to fix your problem.

Read also: Ways to Keep Bathroom Faucets Brushed Nickel Shiny.

One of the problems from a faucet is that when the knobs are supposed to be tight but water still drips out of the faucet; the sound it makes is surely irritating.

When this problem happens to your faucet, you know what you should do. Now that you know how to replace bathroom faucets knobs, you don’t have to worry about the problems.

Originally posted 2020-01-31 20:53:38.

Have you decided which one to buy between bathroom faucets with pull out sprayer or the pull down one?

The difference is not only on the “down” and “out” phrase, but more than that.

If you seek suggestion from the store keeper, they would surely recommend the pull down type. Then what about the pull out faucet?

Related: How to Keep Bathroom Faucets Brushed Nickel Shiny.

Advantages:

Start from the great things you should know. Consider the points: do you like the way it works?

• Short Spout

Some kitchens do not have enough space for tall spout. The short spout will fit to limited space above your sink.

• Longer Hose

Fill your pot next to the sink, not inside the sink. It would be much easier to drag the pot to the stove.

• Less Water Splash

The hose is not only long; it is also flexible. Guaranteed: there will be minimum splash back on the tile and your apron.

• Best Compatibility With Two Lever System

Compared to pull down type, this pull out type accommodates two lever system better. The reason is simple: the temperature should be adjusted first before letting the water to run off.

Disadvantages:

There are some turns down of this model. Learning them will allow you to anticipate the worst thing that may come.

• Not Popular

Its design somehow does not fit an ideal kitchen. Many buyers think this faucet style belongs to the other part of the house.

• Absurd Design

If you care about the final look, then this model is not on the list from the beginning. It has obvious connector for the hose, and somehow fits better for bathroom than a kitchen.

• Limited Flexibility

Filling short item like a pot would be easy, but how about a pitcher? You need to tilt the pitcher, and scoop more water to fill it to the top.

Installation Steps:

1. First, prepare some basic tools like plumber’s putty, adjustable wrench, and safety glasses. Just in case you need extra lighting, put flashlight on your tool box. Make sure you have three holes sink or you can’t install this faucet.
2. Remove the wing nuts from the threaded faucet shanks. They are in under the two levers and you are going to use them to secure the faucet position.
3. Apply putty on the outer edge of faucet plate.
4. Put the inlet down through the holes and set the position of the faucet on the sink.
5. Place the wing nuts to the faucet shank from under the sink and tighten it using your hand. Use flashlight if needed.
6. Slip the weight to the pullout hose.
7. Tighten the fast connect hose to the inlet line (the middle one). There should be a hard stop.
8. Connect the left side with hot water supply and the right side to the cold water supply.

Great thing about pull out sprayer is its wide reach without consuming too much vertical space. Even though this model is not the most favorite in the market, but it is more convenient to fill the pan without putting it inside the sink.

The installation steps are not complicated, either. So, have you decided to choose bathroom faucets with pull out sprayer? Read also about bathroom faucets brushed nickel.

Originally posted 2020-01-30 02:45:31.

It is a wise decision to go the store after reading the bathroom faucets reviews. The previous buyers’ experience would be a great help to choose the one that fits to your bathroom and style.

Even though a faucet is just a finishing touch, it does determine the final look of the room. Remember: different brands, different performance.

Read also:

• Ways to Keep bathroom faucet brushed nickel shiny
• Narrow bathroom vanity with sink
• How to remove mold and mildew from shower stall.

1. The Water Slide Type

This is the most favorite style among buyers nowadays. You would get classic look, with two options of finishing: polished chrome and brushed nickel.

Good:

• Using waterfall concept, there will be no more water splashing from the overwhelming pressure and poor angle installation.
• Guaranteeing no leak at all, for its disc valve technology.
• Allowing 1,5 gallon of water runs per minute.
• Installing in ease on one hole sink.

Bad:

• Running gentle flow of water; it won’t help much to clean things like razor. Even in maximum pressure, the flow is still to gentle to remove the fine hair stuck on the razor.

2. Angular Type

This model fits those who are looking for super modern style. The angular shape and anti corrosion iron material gives off charming aura without being the focal pint in the sink.

Good:

• Taking less space on the sink, reserving more space for you to put things.
• Having double rotation head. Simple navigation to hot and cold water option.
• Resisting scratch and corrosion over time.
• Being tested to 500.000 opens and closes; no leaking found.

Bad:

• Having monotonous finishing: chrome and stainless only. More colors like black would be lovely addition to match more bathroom wallpaper.

3. Two Handles Type

Looking for the old goods for your bathroom stuff? Ask for the two handles type. To fit the theme, manufacturers provide oil bronze finish, nickel brush and chrome. Its dim shine is the attraction from the past time.

Good:

• Getting the right temperature with two handles system. The water will run from the middle spout.
• Coming with aerated holes, suitable to be utilized daily.
• Controlling water flow per opening, helping to reserve more gallons of water per year.
• Giving a pop up waste in the pack. No need to buy it separately.

Bad:

• Requiring three holes sink. The middle one should be 4 inches wide.

4. Lever Type

Choosing the two handle types is not always equal to being old. The lever type also has two handles, but with classic modern vibe. Manufacturer puts curve design on the product, too. Available in polished chrome finish.

Good:

• Controlling water temperature to the precise heat and cold, with luxury touch.
• Possessing high curve spout, making it easier to wash your hand on low sink.
• Cleaning with ease, since chrome finish will not have color change.
• Saving more money. This design is not pricey and affordable enough, even for the limited budget plan.

Bad:

• Getting stained easily. Especially to water, the lever design is quite vulnerable, even after a nice polishing.

Read also: How to Decorate Bathroom Vanity with Sink.

As a part of remodeling project, changing faucet style is the most basic things that will cost you less than changing the whole interior. That is why, detailed things like shape, style and color could get you closer to the dream faucet. Moreover, learning about the strength and weakness from bathroom faucets reviews will save you some money in your pocket.

Originally posted 2020-01-29 15:50:40.

At first, bathroom faucets brushed nickel is so glowing and charming, pointing out to the finishing sparkle.

However, the point that makes this nickel faucet popular also makes it a little troublesome to clean.

Unlike the durable and less charming material that could stand almost any kind of treatment, this shiny faucet has special know how.

Read also: Bathroom Remodel on a Budget.

The Tools

1. Using Cloth

The simplest thing to do is using cotton based cloth to wipe the faucet. This is the daily maintenance that will help you eliminating the dust, smudges, or any water mark.

Instead of doing it sloppily, circular motion will clean the faucet better. If the gunk has built up near the faucet neck, dip the cloth to a bowl of warm water.

Put the wet cloth on the gunk for a while, before wiping it.

When you see that the water is not cleaning the gunk thoroughly, grab a plain soap: the one without any scent or additives. Mix some drops of the soap to a bowl of water, and use it to clean the stubborn gunk.

2. Applying Wax

Once a month or every other month, you are going to take a polishing day. You might have to stop by a store and buy the waxing product for nickel.

Read the instruction carefully and see if the brand is compatible with any nickel product. If necessary, you can ring the costumer service and ask directly to the staff.

Prepare cotton and apply a thin layer of wax on the faucet surface. Allow the wax to stay on it for several minutes.

Restrain yourself to run the water from the faucet. Approximately five to ten minutes after layering, you can wipe the wax with clean cotton in circular motion.

3. Using Vinegar

You cannot immediately pour the vinegar to your nickel faucet. First, you need to dilute it with normal water: one glass of water and one glass of vinegar.

Take a cotton bud and dab it to the solution. Pick the spot on the back of the faucet to try out the solution. Wipe the cotton bud on a limited area and let it sit for half an hour.

If the nickel color is not changing, then it is a green light to go with the whole faucet. Right after the vinegar cleaning is done, use wet cotton to clean the vinegar residue. The final touch would be wiping the faucet with dry cotton cloth.

Big Mistakes to Do

Those who do not bother to learn more about the correct ways to maintain the nickel faucet will tend to do these mistakes. Make sure you are not one of them.

1. Using Hard Surface Cleaner

Well, it is definitely bad because this product would make scratch to the nickel. Guess what? A single scratch on nickel cannot be undone; it will last forever.

2. Picking Alcohol or Ammonia Based Products

The problem with this product is its destructive ingredients to natural nickel color. Once this alcohol or ammonia based product touch your faucet, it will take out the shine.

It turns out that any metal-based furniture has bad relationship with chemical. Moreover, the bathroom furniture will be exposed to water and certain level of humidity.

Luckily, you know how to deal with this situation; wipe clean, polish the surface and last source is diluted vinegar. One of these methods should be enough to maintain your bathroom faucets brushed nickel.

Originally posted 2020-01-28 20:32:20.

Bathroom light fixtures can be made of so many materials. Different kind of material surely requires different treatment, as well as oil-rubbed bronze.

Having a bathroom light that is made of oil-rubbed bronze fixture surely force you to maintain it differently than you maintain any other fixture.

Hence, here are some tips that you can use in maintaining oil-rubbed bronze bathroom light.

Read also: Bathroom Light Fixtures Led Installation Tips.

1. Clean the Fixtures Often

The first and the simplest tip is by cleaning the oil-rubbed bronze fixture more often than cleaning any other fixture. Do the routine cleaning to your oil-rubbed bronze to keep it from corrosion, deterioration and also from green film.

Those are the things that probably will ruin the fixture. Keep the great colors of your oil-rubbed bronze shining by doing the right in routine cleaning.

2. Keep It from Dust

It’s sure that we need to keep all of our things from dust to keep it clean and look shiny. Keeping oil-rubbed bronze fixture from dust requires different ways than we usually do to other fixtures.

Always remember to not using shaving gel, toothpaste hairspray and any other bathroom grime since those things can ruin the surface of the fixtures. Use dry and soft flannel instead and wipe it gently to the fixtures.

3. Remove the Grim

A neglected bronze faucet surely requires routine cleaning since there will be so many grim stick on it. In case you already find so much grim, you can use a soft-bristle and an approved gentle cleaning ways.

Here is the formula. Mix one tablespoon of salt into three bottles of warm water then wipe the bathroom fixture with that formula and rinse it with clear water.

Remove all the grime and also the dust from around the base all crevices. Finish it gently using a flannel cloth to wipe the bathroom fixtures.

4. Polish Periodically

If the second and third tips are only on the surface, then you can go deeper with this tip. Dip any clean flannel cloth to liquid wax then wipe it to the entire bathroom fixtures.

Wait until it’s dry enough to coat the entire fixture. After that, use a fresh or new flannel cloth to burnish the metal. This step will help the fixtures to restore the shine on the bronze that has probably faded because of time.

5. Prevent Bronze Disease

This last step is probably the most important one since it will help you to prevent the bronze fixture from any diseases that may appears.

When the combination of oxygen and moisture from the cleaning process produce chlorides, it’s time for you to worry since there will be a rough corrosion that may appears too.

Reduce this possibility by using sodium sesquicarbonate that is also used by professional plumbers in removing any diseases on bronze.

Read also: Soft Bathroom Lighting Modern Design Ideas.

Taking care of bronze fixture, especially in the bathroom surely needs different kind of maintenance. This kind of material is special and rarely used. Therefore, those tips will definitely ease you in maintaining your oil-rubbed bronze fixtures.

Originally posted 2020-01-27 01:04:25.